Kontron AT8402 CLI - Manual (Page 160)

Utility Commands AT8402
AT8402 CLI Reference Manual Page 4 - 20
4.4.1 logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
Default disabled; critical when enabled
Format
logging buffered
Mode Global Config
4.4.1.1 no logging buffered
This command disables logging to in-memory log.
Format
no logging buffered
Mode Global Config
4.4.2 logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full
capacity. Otherwise when the log file reaches full capacity, logging stops.
Default enabled
Format logging buffered wrap
Mode Privileged EXEC
4.4.2.1 no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop
when the log file capacity is full.
Format
no logging buffered wrap
Mode Privileged EXEC
4.4.3 logging cli-command
This command enables the CLI command logging feature, which enables the
FASTPATH software to log all CLI commands issued on the system.
Default enabled
Format
logging cli-command
Mode
Global Config
4.4.3.1 no logging cli-command
This command disables the CLI command Logging feature.
Format
no logging cli-command
Mode Global Config
4.4.4 logging console
This command enables logging to the console. You can specify the <severitylevel>
value as either an integer from 0 to 7 or symbolically through one of the following