Kontron AT8402 CLI - Manual (Page 58)

Switching Commands AT8402
AT8402 CLI Reference Manual Page 2 - 26
Autodetect - To allow the port to be dynamically registered in this
VLAN via GVRP. The port will not participate in this VLAN unless a
join request is received on this port. This is equivalent to registration
normal in the IEEE 802.1Q standard.
Configured The configured degree of participation of this port in this VLAN. The
permissible values are:
Include - This port is always a member of this VLAN. This is equiva-
lent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is equiva-
lent to registration forbidden in the IEEE 802.1Q standard.
Autodetect - To allow the port to be dynamically registered in this
VLAN via GVRP. The port will not participate in this VLAN unless a
join request is received on this port. This is equivalent to registration
normal in the IEEE 802.1Q standard.
Tagging The tagging behavior for this port in this VLAN.
Tagged - Transmit traffic for this VLAN as tagged frames.
Untagged - Transmit traffic for this VLAN as untagged frames.
2.3.25 show vlan brief
This command displays a list of all configured VLANs.
Format show vlan brief
Modes Privileged EXEC
User EXEC
VLAN ID There is a VLAN Identifier (vlanid) associated with each VLAN. The
range of the VLAN ID is 1 to 4094.
VLAN Name A string associated with this VLAN as a convenience. It can be up to
32 alphanumeric characters long, including blanks. The default is
blank. VLAN ID 1 always has a name of “Default.” This field is
optional.
VLAN Type Type of VLAN, which can be Default (VLAN ID = 1) or static (one
that is configured and permanently defined), or a Dynamic (one that is
created by GVRP registration).
2.3.26 show vlan port
This command displays VLAN port information.
Format
show vlan port
{<slot/port> | all}
Modes Privileged EXEC
User EXEC
Interface Valid slot and port number separated by forward slashes. It is possible
to set the parameters for all ports by using the selectors on the top line.
Port VLAN ID The VLAN ID that this port will assign to untagged frames or priority
tagged frames received on this port. The value must be for an existing
VLAN. The factory default is 1.