Kontron AT8402 CLI - Manual (Page 216)

Management Commands AT8402
AT8402 CLI Reference Manual Page 5 - 26
5.8.6.1 no radius server retransmit
This command sets the maximum number of times a request packet is re-transmitted, to
the default value.
Format
no radius server retransmit
Mode Global Config
5.8.7 radius server timeout
This command sets the timeout value (in seconds) after which a request must be
retransmitted to the RADIUS server if no response is received. The timeout value is an
integer in the range of 1 to 30.
Default
5
Format
radius server timeout
<seconds>
Mode Global Config
5.8.7.1 no radius server timeout
This command sets the timeout value to the default value.
Format
no radius server timeout
Mode Global Config
5.8.8 show radius
This command is used to display the various RADIUS configuration items for the
switch as well as the configured RADIUS servers. If the optional token 'servers' is not
included, the following RADIUS configuration items are displayed.
Format
show radius
[servers]
Mode Privileged EXEC
Primary Server IP Address The configured server currently in use for authentica-
tion.
Number of configured servers The configured IP address of the authentication
server.
Max number of retransmits The configured value of the maximum number of times
a request packet is retransmitted.
Timeout Duration The configured timeout value, in seconds, for request re-transmis-
sions.
Accounting Mode Yes or No.
If you use the [servers] keyword, the following information displays:
IP Address
IP address of the configured RADIUS server.
Port The port in use by this server.
Type Primary or secondary.
Secret Configured Yes / No.