Kontron AT8402 CLI - Manual (Page 95)

AT8402 Switching Commands
Page 2 - 63 AT8402 CLI Reference Manual
Default 10 seconds
Format
set igmp maxresponse
<1-3599>
Modes Global Config
Interface Config
Format set igmp maxresponse <vlan_id> <1-3599>
Mode VLAN Config
2.15.5.1 no set igmp maxresponse
This command sets the max response time (on the interface or VLAN) to the default
value.
Format
no set igmp maxresponse
Modes Global Config
Interface Config
Format no set igmp maxresponse <vlan_id>
Mode VLAN Config
2.15.6 set igmp mcrtexpiretime
This command sets the Multicast Router Present Expiration time. The time is set for
the system, on a particular interface or VLAN. This is the amount of time in seconds
that a switch waits for a query to be received on an interface before the interface is
removed from the list of interfaces with multicast routers attached. The range is 0 to
3600 seconds. A value of 0 indicates an infinite time-out, i.e. no expiration.
Default 0
Format set igmp mcrtexpiretime <0-3600>
Modes Global Config
Interface Config
Format
set igmp mcrtexpiretime
<vlan_id> <0-3600>
Mode VLAN Config
2.15.6.1 no set igmp mcrtexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set
for the system, on a particular interface or a VLAN.
Format no set igmp mcrtexpiretime
Modes Global Config
Interface Config
Format
no set igmp mcrtexpiretime
<vlan_id>
Mode VLAN Config
2.15.7 set igmp mrouter
This command configures the VLAN ID (<vlan_id>) that has the multicast router
mode enabled.