KEYENCE DL-DN1 - Manual (Page 37)

3-2 I/O Communication
3-9 - DeviceNet Compatible Network Unit DL-DN1 User's Manual -
3
Comm
un
ica
ti
ng wit
h th
e
IB
Ser
ies
„Warning information list
Output
Sensor amplifier ID numbers 01 to 04 are assigned to bits 0 to 3, respectively.
For details of communication methods, see "Reading an output from a sensor
amplifier" (page 3-15).
„3-output mode
IN area
n: The first device number assigned to the DL-DN1
The device assignments are the same for all 3-output modes including extended
modes.
„All 5-output modes
IN area
n: The first device number assigned to the DL-DN1
The device assignments are the same for all 5-output modes including extended
modes.
Warning information Warning code Description Cause Corrective action
nnh (01h to 0Fh) 01h
ID No. "nn" sensor
amplifier warning 1
Check output status
Refer to the IB Series
User's Manual.
1Fh - No warning - -
Device
(DEC)
Name
Bit 7 Bit 6 ... Bit 1 Bit 0
Bit 15 Bit 14 ... Bit 9 Bit 8
n+1 HIGH
ID08 ID07 ... ID02 ID01
Reserved ID15 ... ID10 ID09
n+2 LOW
ID08 ID07 ... ID02 ID01
Reserved ID15 ... ID10 ID09
n+3 GO
ID08 ID07 ... ID02 ID01
Reserved ID15 ... ID10 ID09
Device
(DEC)
Name
Bit 7 Bit 6 ... Bit 1 Bit 0
Bit 15 Bit 14 ... Bit 9 Bit 8
n+1 HIGH
ID08 ID07 ... ID02 ID01
Reserved ID15 ... ID10 ID09
n+2 LOW
ID08 ID07 ... ID02 ID01
Reserved ID15 ... ID10 ID09
n+3 GO
ID08 ID07 ... ID02 ID01
Reserved ID15 ... ID10 ID09
n+4 Check output
ID08 ID07 ... ID02 ID01
Reserved ID15 ... ID10 ID09
n+5 Reserved
ID08 ID07 ... ID02 ID01
Reserved ID15 ... ID10 ID09