KEYENCE DL-CL1 - Manual (Page 24)

2-2 Wiring
2-8 - CC-Link Compatible Network Unit DL-CL1 User’s Manual (FD-MH) -
2
Con
nect
io
n
a
nd
Co
nf
igu
ra
tio
n
 Connecting the cable
Use the following procedures to connect to the CC-Link connector supplied with the
DL-CL1.
1
Connect the trimmed cable to the CC-Link connector.
Insert the cable completely.
2
Attach the CC-Link connector to the DL-CL1.
Plug the connector into the DL-CL1 and screw it down with the screws on each
end.
(Tightening torque: 0.2 to 0.3 N•m)
Terminal name Function
DA/DB/DG Communication signal
SLD Connect the shielded wire of the CC-Link cable.
FG Ground this functional ground terminal. (Ground resistance: 100 ohm or less)