KEYENCE LJ-V7000 Series - Manual (Page 24)

24 LJ-V7000_COM_RM_E
Bit 0 to 2 and bit 8 indicate that continuous send was stopped.
To restart continuous send, start the high-speed data communication in the following order:
"Finalize high-speed data communication"  "Disconnect ethernet communication"  "Start
ethernet communication"  "Initialize ethernet high-speed communication"  "Request preparation
for Ethernet high-speed data communication".
Bit 16 is only valid when batch measurements are on.
When batch measurements are on, the batch measurements can be ended even when the
configured batch count is not fulfilled. Therefore, the callback function is notified with this bit on in
order to determine the break in batch data.