KEYENCE BL-180 - Manual (Page 36)

3.2 Operating Procedure
28
3.2 Operating Procedure
3.2.1 Outline of Operation
To operate the setup software, place the mouse pointer on the item to be
changed, and click the left button of the mouse.
Use the Down Arrow button to select an item from a list. Place the mouse pointer
on a desired item, and click on the item.
Click on the Option button to select one of several items.
In the above settings, Read mode is set to “Single” and Data-send is set for “At
trigger input.”
The Check Box is used to enable special functions. An “X” in the Check Box indi-
cates that a function has been enabled.
In the above settings, “Inspect check-digit[Modulus43]” is enabled.
To enter characters or a value in a field, insert the mouse pointer over the field.
The pointer will change to a cursor. Click inside the field and type in the desired
value.
If the specified value exceeds the setting range, an error message will appear
To shift to a different screen, click the mouse cursor one of the buttons in the win-
dow. For example to return to the previous screen, click on the
button.