A&D Weighing GF-32K - Manual (Page 36)

34
10-2. Details Of The Function Table
Class Item and Parameter Description
0 Fast response, sensitive value FAST
1
MID.
Cond
Condition
2 Slow response, stable value SLOW
Can be changed by response
adjustment. With "Hold 1", sets the
averaging time.
0 Stable when within ±1 digit
1
5t-b
Stability band width
2 Stable when within ±3 digits
The stabilization indicator illuminates
with the display fluctuation within the
range. With "Hold 1", sets the stable
range.
0 OFF Hold
Hold function 1 ON
Holds the display when stable in
animal mode. With " Hold 1 ", ANIMAL
turns on.
0 OFF
1 Normal
2 Strong
trc
Zero tracking
3 Very strong
Keeps zero display by tracking zero
drift.
0 5 times/second 5pd
Display refresh rate 1
10 times/second
Period to refresh the display
0 Point (.) pnt
Decimal point 1 Comma (,)
Decimal point format
0 OFF p-on
Auto display-ON 1 ON
Turns on the weighing mode display
when the AC adapter is connected.
0 OFF poff
Auto display-OFF 1 ON (10 minutes)
Turns off the display after 10
minutes of inactivity.
0 OFF g5i
Capacity indicator 1 ON
Capacity indicator.
Zero: 0%
Maximum capacity: 100%
0 OFF add
Accumulation function 1
ON
Displays and outputs the total value
of the weighing data.
0 Does not display
ba5fnc
Environment
Display
rng
Display at start 1 Displays
Select whether or not to display the
smallest displayable weighing value
at weighing start.
Cl adj
Clock
Refer to "10-7. Clock and Calendar Function"
Confirms and sets the time and
date. The time and date are added
to the output data.
0 No comparison
1 Comparison, excluding "near zero" when stable value or overloaded
2 Comparison, including "near zero" when stable value or overloaded
3 Continuous comparison, excluding "near zero"
Cp
Comparator mode
4 Continuous comparison, including "near zero"
0 Set the upper lower limit value Select Cp Hi or Cp lo. Cp in
Data input method 1 Set the reference value Select Cp ref or Cp lmt.
0 Not added Cp-r
Comparison results 1
Added
Select whether or not to add the
comparison results to the output
data.
0 OFF Cp-b
Main display comparison 1 ON
Displays the results on the main
portion of the display in place of the
weight value.
0 OFF bep
LO buzzer 1 ON
Select whether or not to sound the
LO buzzer.
0 OFF bep
OK buzzer 1 ON
Select whether or not to sound the
OK buzzer.
0 OFF
Cp fnc
Comparator
bep
HI buzzer 1 ON
Select whether or not to sound the
HI buzzer.
: Functions for GX-K series. : Factory settings. Digit is a unit of minimum weighing value.
Displayed
only when
Comparator
output
(GX-04K) is
installed