A&D Weighing GF-32K - Manual (Page 55)

53
11-2. GLP Report
Set the following parameters to output the report.
To print the report, set the "GLP output ( info )" parameter to " 1 " and use MODE 3 of the
AD-8121B. Refer to "16-2. Connection to the AD-8121B Printer" for details on using the
printer.
To output the report to a personal computer using the RS-232C interface, set the "GLP
output ( info )" parameter to " 2 ".
If the time and date are not correct, set the correct time and date in "Clock ( Cl adj )" of the
function table.
Notes
For operational details about calibration and calibration test, refer to "8. Calibration".
The GF-K series does not output time and date to the general format.
Calibration report using the internal mass
Setting of "info 1" Setting of "info 2"
AD-8121 printer format General format
Space, ASCII 20h
<TERM> Terminator, CR , LF or CR
CR Carriage return, ASCII 0Dh
LF Line feed, ASCII 0Ah
Manufacturer
Model
Serial number
ID number
Date
Time
Calibration type
Signature
=========== A = & = D
MODEL ===== GX-30K
S/N ===== 01234567
ID ======= ABCDEFG
DATE
====== 2004/12/31
TIME
======== 12:34:56
CALIBRATED(INT.)
SIGNATURE
- - - - - - - -
~~~~~~~~~~~A~&~D<TERM>
MODEL~~~~~GX-30K
<TERM>
S/N~~~~~01234567 <TERM>
ID~~~~~~~ABCDEFG <TERM>
DATE <TERM>
~~~~~~2004/12/31<TERM>
TIME
<TERM>
~~~~~~~~12:34:56<TERM>
CALIBRATED(INT.)
<TERM>
SIGNATURE <TERM>
<TERM>
<TERM>
----------------
<TERM>
<TERM>
<TERM>