A&D Weighing GF-32K User Manual
Page 59
57
12-2. Data Memory for Weighing Data
The GX-K series can store 200 sets of weighing data in memory (if time and date are added,
the GX-K series can store 100 sets). Even if the AC adapter is removed, the data is
maintained in non-volatile memory.
The GF-K series can store 40 sets of weighing data in memory. Even if the AC adapter is
removed, the data is maintained in non-volatile memory. The GF-K series does not store
time and date.
It is not necessary that the printer or personal computer be continually connected to the
balance, because the balance stores the weighing data in memory.
The data in memory is available to be displayed on the balance for confirmation, or to output
several sets of data at one time to a printer or personal computer. In the function setting,
what data is to be added to the output data (ID number, data number, time and date) can be
selected.
Storing the weighing data
Note If
"
Clr
" blinks in the upper left of the display, delete the data in memory.
Step 1 Set the "Data memory (
data
)" parameter to "
2
".
Step 2 Set the "Time/Date output (
5-td
)" parameter as necessary.
Step 3 The storing mode depends on the "Data output mode (
prt
)" parameter setting.
Four types of storing modes are available to store data.
Key
mode........................ When the
key is pressed and the displayed value is
stable, the balance stores the weighing data.
Auto print modes A ......... When the displayed value is stable and the conditions of "Auto
print polarity", "Auto print difference" and zero point (reference
value) are met, the balance stores the weighing data.
Auto print modes B ......... When the displayed value is stable and the conditions of "Auto
print polarity", "Auto print difference" and last stable data
(reference value) are met, the balance stores the weighing data.
Interval memory mode.... Weighing data is stored at an interval specified in "Interval time
(
int
)". Press the
key to start and stop this mode.
Caution
When weighing data is being stored in memory, the data can not be output to a personal
computer using the RS-232C interface.
Interval memory
standby indicator
Interval memory
active indicator
The data amount
in memory
Memory full
Data number of the
data currently
displayed
Weighing data
being displayed
Memory data
being displayed