A&D Weighing GF-32K - Manual (Page 70)

68
Notes
Using the "PN:mm" command, the tare value can be recalled.
The tare value recalled can be output using the "?PT" command.
The tare value can be changed using the "PT:" command.
"mm" indicates a two-digit numeral value 01 to 20, which corresponds to t01 - t20.
Weighing input mode
In the weighing input mode, a sample tare container is placed on the pan to store the tare
value.
Note
Pressing the CAL key will interrupt the operation and the
balance will return to the tare value confirmation mode (step 3
in "Storing the tare value").
To go to the digital input mode, press and hold the MODE key.
Step 1 The first display in the weighing input mode is the current
weight value and the selected tare number with PT
blinking.
Step 2 Press the RE-ZERO key to set the display to zero.
Step 3 Place a tare (a container) on the weighing pan.
Step 4 Press the PRINT key to store the tare value.
Remove the tare from the pan.
Digital input mode
In the digital input mode, the tare value is entered digitally
using the keys. Use the following keys to store a tare value in
digital input mode.
SAMPLE key ... To select the digit to be changed.
RE-ZERO key.. To change the value of the selected digit.
PRINT key....... To store the tare value.
Go to step 3 of "12-6-1. Storing the tare value".
CAL key.......... To return to the tare value confirmation mode.
Go to step 3 of "12-6-1. Storing the tare value".
MODE key....... Press and hold to go to the weighing input mode.
Tare number
Place container (tare)
on the pan.
Store
Value Digit
Store