AERCO Esteem Boiler with EZ-Set Controller - Manual (Page 121)

GF-135 Esteem 399 Low NOx Boiler
Chapter 18
OMM-0089_0A Installation, Operation & Maintenance Manual Controller Operation
18.3 CH and DHW SETTINGS MENU
Navigation: Home Screen > Installer Menu > CH & DHW Settings > CH Settings
When you press the symbol in the INSTALLER menu, you access the CH & DHW
SETTINGS menu.
When you press the symbol in the CH & DHW SETTINGS menu you access the CH
SETTINGS Menu. See Figure 18-6.
INSTALLER Menu CH & DHW SETTINGS Menu CH SETTINGS Menu
Figure 18-6: Navigation to the HEATING SETTINGS Menu
The CH Settings menu contains settings related to central heating operation (Figure 18-6). Each
line contains a CH Setting followed by its current value. Six CH Settings are displayed on the
screen at one time. Press the UP or DOWN buttons to scroll through additional CH Settings. See
the following for a description of each of these settings.
=======================================================================
18.3.1 Heating Operation (Default: Enabled)
Figure 18-7: HEATING OPERATION Menu
Heating Operation allows the central heating function to be enabled and disabled. Press the UP
or DOWN buttons to select Enabled or Disabled, then press the OK button to store the setting.
Enabling and disabling this setting will do the following:
•
Enabled:
The boiler will respond to a central heating call.
•
Disabled:
The boiler will NOT respond to a central heating call. The heating operation
disabled icon is displayed on the home screen when central heating operation has
been disabled.
Page 121 of 188 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0089_0A
MC1 06/19/14 Ph.: 800-526-0288