AERCO Esteem Boiler with EZ-Set Controller - Manual (Page 144)

GF-135 Esteem 399 Low NOx Boiler
Chapter 18
OMM-0089_0A Installation, Operation & Maintenance Manual Controller Operation
18.5.2 Modbus Address (Default: 0=BCST)
Modbus Address assigns the boiler with a unique address in the Modbus control system. Press
the LEFT or RIGHT buttons to change the Modbus Address then press the OK button to store
the setting.
Figure 18-41: MODBUS ADDRESS Menu
========================================================================
18.6 RESET ALL SETTINGS MENU
Navigation: Home Screen > Installer Menu > Reset All Settings
When you press the Reset All Settings symbol in the INSTALLER menu, you access the
RESET ALL SETTINGS menu.
INSTALLER Menu CH SETTINGS Menu
Figure 18-42: Navigation to the RESET ALL SETTINGS Menu
Reset All Settings allows the installer to reset all CH, DHW, and Cascade settings back to the
original factory defaults. Follow the onscreen instructions to reset all settings back to the original
factory defaults.
Select
Page 144 of 188 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0089_0A
MC1 06/19/14 Ph.: 800-526-0288