Reznor R6GN Option - Installation - High Static Blower Drive - Light Commercial - Manual (Page 17)

17
R6GP-072*-166C MSD kits:
920609 (208-230V, 3Ø, 60 Hz)
920560 (460V, 3Ø, 60 Hz)
Downfl ow Performance Chart ‡ Indicates Factory Sheave Setting for Pre-confi gured Units
External
Unit Static
(in-Wg)
Operating @
230 or 460
Volts
Adjustable Motor Sheave Setting
Fully
Closed
1/2 Turn
Open
1 Turn
Open
1.5 Turns
Open ‡
2.0 Turns
Open
2.5 Turns
Open
3.0 Turns
Open
3.5 Turns
Open
4.0 Turns
Open
4.5 Turns
Open
5.0 Turns
Open
5.5 Turns
Open
6.0 Turns
Open
0.8
CFM
RPM
kW
0.9
CFM 2736 2468 2200
RPM 981 953 925
kW 1.22 1.04 0.85
1.0
CFM 2684 2443 2151
RPM 1009 985 956
kW 1.22 1.01 0.88
1.1
CFM 2632 2351 2070
RPM 1037 1013 988
kW 1.25 1.07 0.89
1.2
CFM 2589 2281 2143
RPM 1066 1041 1019
kW 1.32 1.12 0.98
1.3
CFM 2546 2321 2095
RPM 1098 1072 1046
kW 1.35 1.21 1.07
1.4
CFM 2591 2280 2157
RPM 1124 1102 1078
kW 1.41 1.25 1.10
1.5
CFM 2443 2365 2164
RPM 1157 1128 1108
kW 1.42 1.39 1.18
1.6
CFM 2502 2344
RPM 1186 1161
kW 1.52 1.35
Values include losses for: Unit Casing, 2” Disposable Filters, Dry Evaporator Coil & Installed Heat Exchanger
Values shown refl ect operation at 230V or 460V. For operation at 208V, deduct 0.025 from unit static.
3862
Indicates a recommended unit operational point 1159
3.03
3493
Indicates an allowable setting that is not recommended for unit operation †
† These operational points should be carefully examined by the installer for proper unit setup and heater operation if used.
1017
2.07
Indicates a setting that is not permitted for unit operation
Table 13. Blower Performance for R6GP-072*-166C Units
(6 Ton Downfl ow Models Only)