Reznor R6GN Option - Installation - High Static Blower Drive - Light Commercial - Manual (Page 23)

23
P6SP-120* & Q6SP-120* & Q5SN-120* HSD kits:
920396 (460V, 3Ø, 60 Hz)
920395 (208-230V, 3Ø, 60 Hz)
Downfl ow Performance Chart ‡ Indicates Factory Sheave Setting for Pre-confi gured Units
External
Unit Static
(in-Wg)
Operating @
230 or 460
Volts
Adjustable Motor Sheave Setting
Fully
Closed
1/2 Turn
Open
1 Turn
Open
1.5 Turns
Open
2.0 Turns
Open
2.5 Turns
Open ‡
3.0 Turns
Open
3.5 Turns
Open
4.0 Turns
Open
4.5 Turns
Open
5.0 Turns
Open
5.5 Turns
Open
6.0 Turns
Open
0.9
CFM 4903 4734 4565 4370 4174
RPM 1020 1001 982 962 942
kW 3.01 2.82 2.62 2.42 2.23
1.0
CFM 4724 4561 4397 4185 3973
RPM 1023 1005 986 965 944
kW 2.90 2.72 2.54 2.34 2.14
1.1
CFM 4583 4385 4186 3970 3754
RPM 1026 1007 988 967 946
kW 2.80 2.60 2.40 2.21 2.03
1.2
CFM 4562 4368 4169 3969 3724 3479
RPM 1047 1029 1010 990 969 949
kW 2.92 2.69 2.49 2.29 2.08 1.87
1.3
CFM 4571 4366 4161 3942 3723 3477
RPM 1068 1050 1032 1012 993 972
kW 3.01 2.78 2.56 2.35 2.14 1.93
1.4
CFM 4387 4171 3954 3715 3476
RPM 1071 1053 1035 1015 995
kW 2.87 2.64 2.42 2.20 1.99
1.5
CFM 4354 4164 3960 3757 3493
RPM 1092 1075 1056 1037 1017
kW 3.00 2.74 2.52 2.30 2.07
1.6
CFM 4144 3941 3750 3559
RPM 1096 1078 1059 1039
kW 2.86 2.61 2.40 2.18
1.7
CFM 4119 3934 3749 3555
RPM 1117 1099 1081 1061
kW 2.96 2.72 2.49 2.28
1.8
CFM 4102 3891 3724 3556
RPM 1136 1121 1103 1084
kW 3.00 2.80 2.59 2.37
1.9
CFM 3886 3766 3565
RPM 1140 1123 1105
kW 2.89 2.74 2.50
2.0
CFM 3862 3762 3534
RPM 1159 1142 1126
kW 3.03 2.82 2.58
Values includes losses for: Unit Casing, 2” Disposable Filters & Dry Evaporator Coil
Values shown refl ect operation at 230V or 460V. For operation at 208V, deduct 0.025 from unit static.
Deduct 250 Cfm for electric heater kits
3862
Indicates a recommended unit operational point
1159
3.03
3493
Indicates an allowable setting that is not recommended for unit operation †
† These operational points should be carefully examined by the installer for proper unit setup and heater operation if used.
1017
2.07
Indicates a setting that is not permitted for unit operation
Table 19. Blower Performance for P6SP-120*, Q6SP-120*, & Q5SN-120* Units
(10 Ton Downfl ow Models Only)