Reznor R6GN Option - Installation - High Static Blower Drive - Light Commercial - Manual (Page 34)

34
1
2
3
On Drive Kits (for P6SP Series Units) that require the addition of an external overload relay.
A) Use the included 97” wires to route power from the terminal block (1) to overload relay (2).
B) Use the 19” wires to route power from relay (2) to the blower contactor (3).
C) Discard original wires powering the blower contactor. Bundle all wires neatly.
P6SP Series - 072/090 Units