SINGER 1200 Athena - Manual (Page 16)

• Place spool of thread on horizontal spool pin
{A). If spool being used has a thread retain­
ing silt, this should be placed against the
spool cushion to the right,
» Select correct spool holder according to
type and diameter of spool being used. The
diameter of the end of the spool holder
should always be larger than that of the
spool itself.
® Press spool holder firmly against spool.
...... .......
' ........
''' ■ ^<0.:
"\1
Step I
i‘R|isi[fhih^
you.
* Raise the presser foot.
1. Snap thread into thread guide post.
2. Thread the rear thread guide. Pas|i
threac under flange then over to the far
llll'righiiphliPi^ .