SINGER 1200 Athena User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ladder Seam
SHndstitohsrig a Ladder Seam
The blindstitch ladder seam Is particularly ap
propriate for kr^it and stretch fabrics. It is ideal
for stretchable construction seams, and edge
finishes for necklines, pockets and collars in
sportswear and swimsuits.
« Stitch; blindstitch
® Stitch width: to suit fabric
» Stitch length: to suit fabric
® General purpose needle plate
® General purpose foot
1. Make a test sample to adjust stitch width
and length and needle-thread tension to
suit the fabric. (Needle-thread tension
should be lighter than normal)
2. Cut and fit garment, allowing for 5/8-lnch
(1.5cm) seam allowance. Baste seam line.
3. Place fabric under presser foot so that the
straight stitches fall on the seam line bast
ing and the points toward the center of the
garment.
4. After stitching, open seam> by pulling fabric
back on opposite sides of the seam to pro
duce ladder effect. Press seam allowance
after opening.
Opening Seam to Fixm Ladder Effect
56