Twim-needle stitching, Procedyre – SINGER 1200 Athena User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TWIM-NEEDLE STITCHING
.....
Hear Thread Guide
Take-jp
■_ever
-yy :
TensipaJMC.:.:.,
SeiMfa(pr: f ai ?lpf P j‘|;r
................ ............ .................................................
i^:Gha?5nel
The
twin-needle
simultaneously
produces
two parallel, closely spaced lines of decora
tive stitching. You can stitch with either one or
two colors of thread.
* Stitch length; to suit fabric
» Stitch width: to suit fabric
® General purpose foot
» General purpose needle plate
Caution:
Always
move
the
tv/ln-needle
switch to the
right {
f| symbol) before stitch
ing with the twin-needle. Unless this switch
has been activated, needle breakage will
result. Upon completion of your twin-needle
sewing, return switch to its
ieft
position
( I symbol).
Twin-Needle Switch
m ri
i.... M, .......Ì
Procedyre
® Thread machine with first thread in usual
manner, making certain it passes between
tension separator and right-hand tension
disc.
® Wind bobbin with enough thread to com:-
plets stitching. (Since a bobbin cannot be
filled after a twin-needle is inserted, it is
wise to keep an extra wound bobbin on hand
for replacement)
® Unthread and remove needle.
« Attach detachable spool pin to thread
guidepost and insert the twin needle.
® Pass first thread through right eye of needle.
® Place second spool of thread on detachable
spool pin and thread as before, except
bypass snap-in thread guidepost and pass
thread between tension separator and left-
hand tension disc and through left eye of
needle.
68