SINGER 1200 Athena User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IT
MAl
TWO-STEP BOTTOriHOLlNG
Make a test buttonhole on a sample of your
fabric, with interfacing if being used, before
working on your garment.
• Determine length of button and mark start
and end line of buttonhole on fabric.
• Attach general purpose needle plate and
iwo-sieo buttonhole foot.
® Draw needle and bobbin threads under foot
towards back of machine.
» Place fabric under foot so that buttonhole
start line is aligned with red guideline on
foot. Lower foot.
• Select left side of buttonhole by pushing
button on pattern selection panel.
« Select slow speed, start machine and let it
complete left side of buttonhole.
« Stop machine just before guideline on but
tonhole foot reaches the buttonhole end line
of the fabric.
9 Select right side of buttonhole by pushing
button on pattern selection panel.
• Start machine and let it complete right side
of buttonhole. Stop sewing when stitching
reaches starting bar tack.
72