Threading the bobbin case, Threading the machine – SINGER 1288 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Threading the Bobbin Case
1. Hold bobbin so that thread unwinds in direction
shown, and insert bobbin in bobbin case.
2. Pull thread into notch A in bobbin case, draw it
toward left and into slot B.
3. Draw approximately 10cm (4 inches) of thread diag
onally across the bobbin.
4. Close slide plate, allowing thread to extend through
the slot between the slide plate and the needle plate.
22
Advertising