Maytag Atlantis User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Turn off hot and cold water faucets.
•
Disconnect both water inlet hoses at the
faucets. Lower them to the floor.
•
With the service cord connected to the
electrical outlet, rotate the timer to the
normal start or fill position and pull timer
knob to start washer. Turn water tempera
ture selector switch to warm.
• When water stops draining from the hoses,
disconnect service cord.
•
Lower the drain hose to the floor and al
low it to drain into a floor drain or shallow
pan.
In below-freezing temperatures, ice may form
in the "fill" flume and the pump. Raise the room
temperature and allow time for the ice to melt
before using the washer.
16009485-01
©1999 Maytag Appliances Sales Company
Section 1. General Information
1-6