Safety precautions – Maytag Atlantis User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SAFETY PRECAUTIONS
This manual, as well as the information contained in it, is to be used only by a Maytag
Authorized Service Technician. They should be familiar with and knowledgeable of
proper safety and servicing procedures and possessing high quality testing equipment
associated with microwaves, gas, and electrical appliance repair.
All individuals who attempt repairs by improper means or adjustment subject them
selves and others to the risk of serious or fatal injury.
USE ONLY GENUINE MAYTAG APPROVED FACTORY REPLACEMENT COMPONENTS.
‘'1
PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO AVOID
POSSIBLE EXPOSURE TO EXCESSIVE DANGER AND ELECTRICAL SHOCK:
1. Disconnect electrical supply before servicing machine.
2. If electricity is required for a test:
(A) First, disconnect electrical supply;
(B) Second, make any connections or adjustments required for the test;
(C) Third, connect electrical supply;
(D) Fourth, perform the test. If service is required, disconnect electrical
supply before servicing machine.
3. Please use caution when servicing the machine with the front panel
removed because there is danger of injury due to potential contact
with spinning transmission.
4. Please use caution when servicing the machine with the front panel
removed because there is danger of injury due to contact with a
potential "pinch point” between the turned up edge of the transmission
cover and the tub support flange.