Inner tub, Outer tub assembly, Inner tub -4 outer tub assembly -4 – Maytag Atlantis User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INNER TUB
The inner tub is perforated in a pattern de
signed to allow free flow of the wash and rinse
water for maximum efficiency in removing
sediment, soil deposits, and lint.
The inner tub is constructed entirely of
polypropylene and is secured to the basket
hub assembly with four (4) mounting screws.
A foam gasket is installed between the basket
and the basket hub assembly.
REMOVAL
1. Disconnect power to the unit.
2. Raise the top assembly and lean it back.
3. Remove the tub top.
4. Remove the agitator.
5. Remove the mounting screws.
6. Lift the inner tub up over the center post
and out of the cabinet.
NOTE: When reinstalling the inner tub, be
sure to:
•
Clean all connecting surfaces to ensure
proper sealing.
•
Position the basket on the basket hub
assembly.
• Align the assembly and tighten all screws
securely.
OUTER TUB ASSEMBLY
The outer tub assembly is molded entirely of
polypropylene.
The outer tub assembly is mounted to the bear
ing and seal housing and to the tub support.
A foam gasket and a rubber seal are installed
between the tub bottom and the bearing and
seal housing.
16009485-01
Section 5. Water Related Components
5-4
©1999 Maytag Appliances Sales Company