ADLINK PCIe-7350 - Manual (Page 27)

Hardware Information 17
2.5 Unpacking Checklist
Before unpacking, check the shipping carton for any damage. If
the shipping carton and/or contents are damaged, inform your
dealer immediately. Retain the shipping carton and packing mate-
rials for inspection. Obtain authorization from your dealer before
returning any product to ADLINK. Check if the following items are
included in the package.

PCIe-7350 high-speed DIO card

ADLINK All-in-One CD

User’s manual
If any of the items is damaged or missing, contact your dealer
immediately.
CAUTION
The card must be protected from static discharge and
physical shock. Never remove any of the socketed parts except at
a static-free workstation. Use the anti-static bag shipped with the
product to handle the card. Wear a grounded wrist strap when ser-
vicing.
2.6 Cables and Termination board
The PCIe-7350 is a high-speed digital I/O card. The impedance
matching is very important to the high-speed application for elimi-
nate the signal reflection generated by the cable or PCB trace.
The following cable and termination board is recommended to
improve the signal quality during high-speed signal transfer.
DIN-68H
– Termination board with one 68-pin SCSI-VHDCI con-
nector and user selectable impedance. Refer to Appendix A for
more information.
ACL-10279
– 68-pin SCSI-VHDCI cable with 50Ω impedance
SMB-SMB-1M
– SMB to SMB cable, 1 M, for sample clock in/out
SMB-BNC-1M
– SMB to BNC cable, 1 M, for sample clock in/out