Figure 5-4: pulse io configuration menu – ADLINK HSL-4XMO User Manual
Page 104
Advertising
94
Motion Creator in LinkMaster
Figure 5-4: Pulse IO Configuration Menu
1. Pulse Output Mode: Select the output mode of the pulse
signal (OUT/ DIR). The related function call is
HSL_M_set_pls_outmode().
2. Pulse Input: Sets the configurations of the Pulse input
signal(EA/EB). The related function calls are
HSL_M_set_pls_iptmode(),
HSL_M_set_feedback_src().
3. Buttons:
X
Next Axis: Change operating axis.
X
Save Config: Save current configuration to HSL-4XMO.ini.
X
Operate: Go to the operation menu, refer to section 5.3.4
X
Config Pulse: Go to the Pulse IO Configuration menu, refer
to section 5.3.3
X
Back: Return to the main menu.
Advertising