Subaru 2007 Tribeca User Manual

Page 167

Advertising
background image

4-6

Climate control

To change the system back to the AUTO

mode, press the “AUTO” button.

T OFF button

The Automatic Climate Control system

turns off (the air conditioner compressor

and fan turn off) when the “OFF” button is

pressed.

When the “OFF” button is pressed, the

outside air introduction mode (air inlet se-

lection OFF) is automatically selected.

T Temperature control dial

Driver’s side

Passenger’s side

It is possible to make separate tempera-

ture settings for the driver’s side and pas-

senger’s side. Each temperature setting is

shown on the display. With the dial set at

your desired temperature, the system au-

tomatically adjusts the temperature of air

supplied from the outlets such that the de-

sired temperature is achieved and main-

tained.

Turning the dial counterclockwise and re-

leasing it reduces the temperature by 1

°F

(0.5

°C). Turning the dial clockwise and re-

leasing it increases the temperature by

1

°F (0.5°C). Holding the dial in either

turned position causes the temperature to

change continuously.

With the minimum temperature set, the

system gives maximum cooling perfor-

mance. With the maximum temperature

set, the system gives maximum heating

performance.

400508

400509

400510

A3120BE-B.book 6 ページ 2006年5月30日 火曜日 午前9時32分

Advertising