Subaru 2007 Tribeca - Manual (Page 29)

1-4
Seat, seatbelt and SRS airbags
T Seat cushion angle adjustment
(Driver’s seat only)
To adjust the seat cushion angle, pull up
or push down the front end of the control
switch.
T Seat height adjustment (Driver’s
seat only)
To adjust the seat height, pull up or push
down the rear end of the control switch.
„ Memory function (Driver’s
seat only – if equipped)
Two of your favorite seat positions can be
registered. Register the seat position with
button “1” or “2” and retrieve the seat po-
sition by pressing either button.
The following seat positions can be regis-
tered:
y
Forward/backward position of the seat
y Angle of seatback
y Angle of seat cushion
y Height of seat
T Registration of seat position
1. With the transmission selector lever in
the “P” position, adjust the seat position.
2. While pressing the “SET” button, press
the desired button “1” or “2”.
3. The chime sounds once, and the seat
position is registered.
100352 100353
y Never adjust the seat while driv-
ing to avoid the possibility of loss
of vehicle control and of personal
injury.
y Before adjusting the seat, make
sure the hands and feet of rear
seat passengers or luggage are
clear of the adjusting mechanism.
SET 1 2
100804
A3120BE-B.book 4 ページ ２００６年５月３０日 火曜日 午前９時３２分