Subaru 2007 Tribeca - Manual (Page 353)

11-36
Maintenance and service
3. Pull the wiper blade assembly toward
you to remove it from the wiper arm.
„ Rear window wiper blade rub-
ber
1. Pull out the end of the blade rubber as-
sembly to unlock it from the plastic sup-
port.
2. Pull the blade rubber assembly out of
the plastic support.
1) Metal spines
3. If the new blade rubber is not provided
with two metal spines, remove the metal
spines from the old blade rubber and in-
stall them in the new blade rubber.
4. Align the claws of the plastic support
with the grooves in the blade rubber as-
sembly, then slide the blade rubber as-
sembly into place.
700064
700017
B00064
1
B00333
B00066
A3120BE-B.book 36 ページ ２００６年５月３０日 火曜日 午前９時３２分