Subaru 2007 Tribeca User Manual

Page 168

Advertising
background image

Climate control

4-7

4

CONTINUED

T

– Defroster button

To defrost or dehumidify the windshield

and front door windows, push the defrost-

er button “

”. When the “

” button

is pushed, regardless whether the air con-

ditioner is operating or not, outside air is

drawn into the passenger compartment,

the air conditioner compressor turns on,

air flow is directed towards the windshield

and front door windows, and the indicator

light on the button comes on.

After eliminating the fogging from the

windshield, return the climate control sys-

tem to the AUTO mode by pushing the

“AUTO” button or turn off by pushing the

“OFF” button.

Alternatively, push the “

” button

again to return the system to the setting

that was selected before you activated the

defroster.

T Fan speed control dial

The fan speed control dial has 7 positions:

AUTO position and 6 different fan speed

positions.

The fan speed is shown on the center of

the dial.

With the fan speed control dial in the

AUTO position, the fan speed changes

automatically corresponding the various

conditions: air temperature inside and out-

side of the passenger’s compartment, in-

tensity of the sunlight, etc.

T A/C – Air conditioner button

If the windshield starts to fog when the cli-

mate control system is operated in the

AUTO mode, push the air conditioner but-

ton to defog and dehumidify.

When this button is pushed, the air condi-

tioner compressor turns on and the indica-

tor light on the button comes on. After

eliminating the fogging from the wind-

shield, set the system back to the AUTO

mode by pushing the “AUTO” button.

NOTE

The air conditioner compressor does

not operate when the outside air tem-

perature is below 32

°F (0°C).

400511

400512

400513

A3120BE-B.book 7 ページ 2006年5月30日 火曜日 午前9時32分

Advertising