Subaru 2007 Tribeca - Manual (Page 364)

Maintenance and service
11-47
11
– CONTINUED –
2. Turn the bulb socket counterclockwise
and remove it.
3. Pull the bulb out of the bulb socket and
replace it with a new one.
4. Install the bulb socket by turning it
clockwise. Install the light cover on the
rear gate.
„ Rear gate light
1. Use a flat-head screwdriver to remove
the rear gate light assembly from the rear
gate trim.
2. Pull the bulb out of the bulb socket and
replace it with a new one.
3. Install the rear gate light assembly on
the rear gate.
„ License plate light
0
1. Remove the mounting screws using a
Phillips screwdriver.
2. Remove the lens.
3. Pull the bulb out of the socket. Install a
B00350
B00352
B00353
B00354
A3120BE-B.book 47 ページ ２００６年５月３０日 火曜日 午前９時３２分