CIRCUTOR DISPENSER Series - Manual (Page 48)

Type 3 and Type 4 Contracts:
Figure 51:Create a new tariff (Tariff conditions - Type 3 and Type 4 Contracts)
Table 14:Create a new tariff (Tariff Conditions: Base Parameters)
Base Parameters
Parameter Description Range of values
Power Base (6) Base power of the customer 100 ... 1000 W
Power multiplier (6) Multiplier of the base power 1 ...100
EDA Base (7) Contracted base EDA 275 ... 1000 Wh
EDA Multiplier (7) Base EDA multiplier 1...100
(6) The Contracted power = Power Base x Power multiplier
(7) Parameters only for Type 3 and Type 4 contracts.
EDA = EDA Base x EDA Multiplier
The price of energy and contracted power are fixed values that can vary according to the dif-
ferent factors applied:
 Excess and limiting factor of contracted power (See 3.3.- CONTROLLING THE MAX-
IMUM POWER )
 Bonus and restriction factors applied to the price of energy. (See 3.2.- ENERGY
FACTORS )
Table 15:Create a new tariff (Tariff Conditions: Definition of factors)
Definition of factors
Parameter Description Range of values
Coefficients of contracted power
Excess
Factor that increases the maximum power of the in-
stallation when the micro-grid is in the bonus mode.
1 ...3
Limitation
Factor that decreases the maximum power of the
installation when the micro-grid is in the restriction
mode
0... 1
Coefficients of energy price
Bonus
Factor to reduce the price of energy when the mi-
cro-grid is in the bonus mode
0.4 ... 1
Restriction
Factor to increase the price of energy when the mi-
cro-grid is in the bonus mode
1.2 ... 3
48
Dispenser Universal System
Instruction Manual