CIRCUTOR DISPENSER Series User Manual
Page 8
The
Dispenser Universal is the unit that is installed in the user's home. It is an energy meter
with the capacity to manage user consumption from a micro-grid according to the status of the
grid.
It is designed according to the EN 62053-21:2003 standard for active energy classes 1 and 2
and according to the UNE-EN 62053-23:2003 standard for measuring class 2 reactive energy.
Figure 1:Image of the Dispenser Universal
The unit features:
-
Display , which shows the information of the user's contract.
-
Two buttons, used to browse the display screens and recover the power supply in the
event of a power cut.
- 2 indicator LEDs: Verification and Pilot�
- RS-485 communications, with the MODBUS RTU® protocol
- 1 general relay output, which allows the activation/deactivation of the power supply.
-
1 auxiliary relay output, which allows the activation/deactivation of the secondary loads.
-
RFID card reader, used to load the contract generated in the DISPENSER-SOFT ap-
plication.
8
Dispenser Universal System
Instruction Manual