Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 100)

Installing under UNIX/LINUX
86
AX3000 - User's Manual
To program a new key (or to modify an existing one) select the sequence
number and press <Space>. The following dialog box is displayed:
Key(s) Sequence: press <Space> to enter the keystroke to be remapped.
Associated String: enter the value associated with the key sequence. ASCII
codes lower than 20h can be entered as '\xx' (where xx is the hexadecimal
value of the ASCII code).
Direction: two possible values:
- Remote: when the key sequence is pressed, the 'Associated String' is
sent to the server.
- Local: when the key sequence is pressed, the 'Associated String' is
interpreted by the terminal (as if the string had been sent by the server).
5.1.5 - Colouring Mode
A background colour, plus a foreground colour for each monochrome character
attribute or graphics character, may be set through the Colouring Mode. This
function allows monochrome applications to be displayed in colour.
The "Colouring Mode" parameter offers 2 values:
- Standard: 6 colouring attributes
- Enhanced: 16 colouring attributes
To customise the colouring mode, select the "Colouring Mode Settings"
parameter and press <Space>. The dialog box depends on which colouring
mode is chosen.