Axel AX3000 65 User's Manual - firmware 0632 User Manual

Page 24

Advertising
background image

Initial Power-On


10

AX3000 - User's Manual

This chapter describes the 'Quick Set-Up' feature and the 'Auto-Configuration'
service.

When the terminal is switched on up for the very first time two configuration
methods are available:

- Quick Set-Up: a wizard allows the terminal to be set-up in few seconds

for typical use.

- Auto-Configuration: used in conjunction with AxRM, this function allows

the terminal to automatically receive new firmware and/or a configuration.

2.1 - QUICK SET-UP

This feature is automatically run when the AX3000 is powered up for the first
time or can be accessed at any time from the interactive set-up, by pressing
Ctrl-Alt-Esc (menu [Configuration]-[Quick set-up]).

The quick set-up is designed for a typical simple environment of:

- One server
- An optional router
- All sessions set identically
- An optional printer.

Note: After the ’Quick set-up’ is run all other parameters within the terminal are
reset to their factory default values.

The ‘quick set-up’ guides the user through a setup menu in an intuitive manner.

Advertising
This manual is related to the following products: