Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 110)

Installing under UNIX/LINUX
96
AX3000 - User's Manual
- Session Type: select 'VNC'
- Server: the server name on which the Xvnc daemon is run
- TCP Port: numeric value associated with the display (see Chapter 5.2.2).
- Connection Properties: pressing <Space> displays a dialog box which
lets certain connection parameters be changed. See sub-section a.
- Password: this allows the optional VNC connection password to be
stored (Note: this is the VNC password - not the user password).
- Resolution: Press <Space> to display the resolutions/frequencies list:
- Bits per pixel: press <space> to select the number of colours (8 Bpp =
256 colours or 16 Bpp = 65536 colours).
- Additional Parameters: pressing <Space> displays a dialog box which
lets certain VNC parameters be changed. See sub-section b.
Note: after exiting set-up, we advise power-cycling the terminal
a) Connection Properties
Within the 'Session Profile' box, select 'Connection Properties' and press
<Space>. The following box is displayed: