Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 88)

Using the AX3000
74
AX3000 - User's Manual
4.7 - AX3000 HOT-KEYS
The AX3000 hot-keys are listed in the following table. (These hot-keys are
locally processed by the AX3000. They are independent of emulation).
PC-Keyboard 5250-Keyboard Action
<Ctrl><Alt><Esc> <Rest><Alt><Esc> Enters the AX3000 Set-Up
<Alt><Fx> <Alt><Fx> Switches session (these hot-
key can be modified)
<Alt><+> <Alt><+> Switches to next session
<Alt><-> <Alt><-> Switches to previous
session
<Ctrl><Alt><S> <Rest><Alt><S> Locks the screen.
<Ctrl><Alt><Pause> <Rest><Alt><Pause>
Sends a break code.
Note: only for telnet
protocol.
<Ctrl><Alt><Prt Scr> <Rest><Alt><Prt Scr> Performs a screen dump to
the default auxiliary port.
<Ctrl><Alt><D> <Rest><Alt><D> Closes the current session
<Ctrl><Alt><K> <Rest><Alt><K> Changes the keyboard type
(PC¥AS/400)
<Ctrl><Alt><Del> <Rest><Alt><Del> Shuts down the AX3000.
<Ctrl><Alt><I>
Information about the RDP,
ICA or VNC current session.
<Ctrl><Alt><A> <Rest><Alt><A> TFT auto-adjust screen
<Ctrl><Alt><X> <Rest><Alt><X> Opens the connection box
(see Chapter 9.2)
<Ctrl><Alt><BackTab> <Rest><Alt><BackTab
>
Set 'text mode' set-up
<Ctrl><C> or
<Ctrl><Alt><C> <Rest><C> Select et copy a screen
zone (mouse is requested)
<Ctrl><V> or
<Ctrl><Alt><V> <Rest><V> Paste the text
Note: keystrokes written in bold can be disabled. See Chapter A.10.2, section i.