Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 176)

Installing under Windows
162
AX3000 - User's Manual
sub-section c).
b) Declaring a Redirected COM Port
On RDP/ICA connection a redirected COM port will be automatically added to
the Windows server resources. It will be removed on disconnection.
Before being redirected an RDP/ICA COM Port must be declared at the
'physical port' level. The available ports are: auxiliary ports (parallel, Aux1 and
Aux2), USB and network logical ports.
Select the dialog box of the 'Connection port' (menu [Configuration]-[Ports]-
[xxx]). For example, the Aux1 port:
Set the 'Active' parameter to 'As COM port' or 'As Printer and COM'. Then
select 'COM Port Parameters' and press <Space>. The following box is
displayed: