Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 258)

Appendix
244
AX3000 - User's Manual
parallel_operating_mode= (optimised |standard)
parallel_sup_signals= (none | select | paper | both)
c) USB Logical Ports
In the following section of the file, for ease of reading the USB logical port
number (1 to 4) has been represented by the '%' character. In a real
configuration file, the parameters for each port would, of course, be listed.
usb%_service=none (none | rtty | printd | lpd | rcmd
rtelnet | Prt5250 | Prt3270
tty)
usb%_use=bi-directional (printer | bi-directional)
usb%_speed=38400 (300 | 600 | 1200 | 2400 | 4800
9600 | 19200 | 38400 | 57600
115200)
usb%_data (7-1-none | 7-1-odd | 7-1-even
8-1-none | 8-1-odd | 8-1-even
7-2-none | 7-2-odd | 7-2-even
8-2-none | 8-2-odd | 8-2-even)
Usb%_flow_ctrl=rts-cts (none | rts-cts | dtr-dsr)
usb%_rts_init (high | low)
usb%_dtr_init (high | low)
usb%_service_name=Usb% (character string, 8 char max.)
usb%_associate_host=vangogh (character string, 64 char max.)
usb%_associate_term=ansi (character string, 8 char max.)
usb%_associate_autoconn=yes (yes | no)
usb%_associate_reconn=yes (yes | no)
usb%_service_tcpport=2050 (number)
usb%_rtty_accept=no
(yes | no)
usb%_filter_nl=no (yes | no)
usb%_preprint_string= (character string, 48 char max.)
usb%_postprint_string= (character string, 48 char max.)
usb%_associate_devname= (character string, 10 char max.)
usb%_associate_msgqname= (character string, 10 char max.)
usb%_associate_msgqlib= (character string, 10 char max.)
usb%_associate_font=11 (character string, 10 char max.)
usb%_associate_mfrtypmdl= (character string, 10 char max.)
usb%_associate_pprsrc1= (character string, 10 char max.)