Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 277)

Appendix
AX3000 - User's Manual
263
4 - Change the file "/axfirm/ax3000" QTFTP user's rights:
===> CHGAUT OBJ('/axfirm/ax3000') USER(QTFTP) DTAAUT(*RX) OBJAUT(*NONE)
5 - User's right can be checked by invoking:
===> WRKLNK OBJ('/axfirm')
===> WRKLNK OBJ('/axfirm/ax3000')
6 - Change the default TFTP directory:
===> CHGTFTPA ALTSRCDIR('/axfirm')
7 - Stop and restart the TFTP server
===> ENDTCPSVR(*TFTP)
===> STRTCPSVR(*TFTP)
Then download the firmware from the AX3000 interactive set-up (see next
chapter).
d) Windows
Windows operating systems don't include tftp and bootp protocols.
☺ : A Windows administration utility (AxRM or Axel Remote Management) is
available free on the Axel Web site which includes both these protocols. See
Chapter 8.8.2.
A.9.2 - Downloading by TFTP Protocol
To download firmware using the tftp protocol, the firmware file location (filename
and tftp host IP address) must be given.
a) Remote Administration
The remote administration command depends on the operating system. Refer
to the Chapter 5.5 (Unix/Linux), the Chapter 6.4 (OS/400) or the Chapter 7.3
(OS/390).