Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 68)

Interactive Set-Up
54
AX3000 - User's Manual
d) Setting TCP Logical Ports
Select the [Configuration]-[Ports]-[TCP Logical Ports]-[NetX] dialog box to
configure TCP logical ports:
The following parameters can be set:
- Connection Type: always 'raw'
- Server: press <Space> to select the server from a list.
- TCP Port: numeric identifier of the connection. The default value is 2048.
- Inactivity Time-out (sec): the session is automatically disconnected
after this inactivity delay.
- Associated Service (ldp, prt5250, tty...): see Chapter 3.5.2 and below.
- RDP/ICA Redirection: see Chapter 8.
3.5.2 - Connecting a Printer
This chapter describes the set-up for an LPD printer attached to the AX3000.
LPD is a universal network printing protocol supported by all operating systems.
Often there may be a better protocol to use, for example:
- Prt5250: specific for OS/400 (see Chapter 6.3),
- Prt3270: specific for S/390 (see Chapter 7.3),
- tty: specific for Unix/Linux (see Chapter 5.3),
- RDP or ICA redirection: dedicated to Windows (see Chapter 8.1.4 and
8.2.5).