Button lock, Basic information about the touch screen, General operation – Becker TRAFFIC ASSIST PRO Z302 User Manual
Page 25
25
GENERAL OPERATION
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
> Press the
Complete off
button to switch
Traffic Assist Pro off completely.
Button lock
You can protect your Traffic Assist Pro
from inadvertent operation of the touch-
screen or the
button.
> Push the slide
on the left-hand side
of the Traffic Assist Pro downwards.
The button lock is then active. The touch-
screen and the
button cannot be oper-
ated.
Before you can operate the Traffic Assist
Pro now, you need to push the slide
up again.
Basic information about the
touch screen
The Traffic Assist Pro is fitted with a
touch screen.
Note:
During the 5 seconds, you can cancel the
switch off process by pressing the
Cancel
button or the
button.
Note:
We recommend that you place the Traf-
fic Assist Pro in sleep mode in the event
of short interruptions to operation (of up
to a week).
This significantly reduces the switch-on
time and the Traffic Assist Pro finds the
satellites required for navigation much
faster.
If route guidance was active when sleep
mode is activated, it is automatically re-
sumed if the Traffic Assist Pro is switched
back on again within approx. 4 hours.
1
1
1
Note:
To ensure that the display's surface is not
damaged, you may only touch it with
your fingers or a blunt, non-smearing ob-
ject.