Removing the remote control, General operation – Becker TRAFFIC ASSIST PRO Z302 User Manual
Page 32
Advertising
32
>>>
GENERAL OPERATION
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
> Position the base plate so that the word
UP is pointing in the direction of travel.
> Secure the base plate using the supplied
screws or self-adhesive film.
> Press the remote control onto the base
plate.
> Hold the bottom part of the remote
control and turn the remote control
clockwise until it locks into place.
Removing the remote control
You can remove the remote control again,
to change the battery for example.
> Hold the bottom part of the remote
control and turn the remote control
anti-clockwise until it becomes de-
tached from the base plate.
Note:
If you wish to stick the base plate in place,
you will first need to clean the adhesive
surfaces.
Advertising
This manual is related to the following products: