Becker TRAFFIC ASSIST PRO Z302 - Manual (Page 73)

73
NAVIGATION MODE >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Traffic announcements
using TMC
Your Traffic Assist Pro can receive traffic
announcements (TMC announcements)
from radio stations. The TMC antenna
and the power supply need to be connect-
ed to the carrier plate for this.
Traffic announcements are transmitted by
radio stations via the TMC (Traffic Mes-
sage Channel) in addition to the radio
programme and are received and analysed
by the navigation system. Receiving traffic
announcements is free of charge.
The Traffic Assist Pro constantly checks
whether there are any relevant announce-
ments for the route that has been set. All
traffic problems that have been received
are shown on the map.
If the continuous checks determine that a
traffic announcement is relevant to route
guidance, the unit can automatically re-
calculate a new route to the destination
(See “The TMC button” on page 63.)
Displaying TMC messages on the
map
Current TMC messages are displayed on
the map graphically. Sections of the route
where there are traffic problems are high-
lighted blue. Arrows indicating the traffic
direction which is affected by the traffic
problem continue to be displayed.
In addition to the coloured mark, a warn-
ing sign is displayed on the stretch of road
affected.
Note:
TMC is not available in all countries
(currently only Belgium, Germany, Den-
mark, France, Italy, the Netherlands,
Austria, Sweden, Switzerland and Spain).
In Germany, traffic announcements can
be received via TMCpro with the Traffic
Assist Pro Z302.
Note:
As the traffic announcements are trans-
mitted by radio stations, we cannot as-
sume responsibility for the completeness
or accuracy of the announcements.
Austria: The location and event code was
made available by ASFINAG and BM-
VIT.