Becker TRAFFIC ASSIST PRO Z302 - Manual (Page 34)

34
>>> GENERAL OPERATION
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Operating the Traffic Assist Pro
using the remote control
You can control most functions and the
main functions of the Traffic Assist Pro
using the remote control.
It is provided with five buttons and a con-
trol ring.
The main functions of the individual re-
mote control buttons are:
When using the remote control and,
for example, using the control ring
to
scroll through a menu, the active menu
entry is highlighted.
If you operate the Traffic Assist Pro using
the touchscreen again, the highlighting
disappears.
The highlighting also disappears after ap-
prox. 8 seconds if the remote control is
not operated during this time.
The example below shows the main menu
with the
TMC button highlighted.
But-
ton Basic function
Opens the map display. Opens
the options menu for the map dis-
play if the map is already active.
Starts the telephone mode. The
function is equivalent to pressing
the
Phone button in the main
menu or the button in the
options menu of the map display.
1
3
2 5
4
6
1
2
Starts up the voice entry.
The function is equivalent to
pressing the
button, e.g. in
the input menu.
Press briefly:
• Displays menu markings.
• Selects and confirms menu en-
tries.
Press and hold:
• Confirms the previous entry in
the input menu.
• E.g. in fast access mode - opens
the Edit menu ( button).
• In the address input - accepts
entries and starts route guid-
ance.
Back function - is equivalent to
the function of the
button.
Pressing and holding the button
opens the main menu.
Control ring for selecting entries
in lists and menus.
Displays menu markings.
But-
ton Basic function
3
4
5
6
6