Becker TRAFFIC ASSIST PRO Z302 - Manual (Page 67)

67
NAVIGATION MODE >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
The Warnings button
In the Warnings settings window you can
select which warnings are to be displayed
by the Traffic Assist Pro or which warn-
ings are to be output.
> Press the
Warnings button in the set-
tings menu.
The Warnings settings window appears.
The following setting options are then
available:
•
Driver alerts
You can have signs displayed, for
example for dangerous curves or steep
gradients, provided this information is
stored in the map data.
• Speed info
You can select whether speed limits are
displayed in parallel to the navigation.
You can also receive an audible warning
about exceeding the speed limit.
• Danger spots *
You can receive a warning about danger
points such as permanent speed checks.
The Driver alerts button
You can have signs displayed, e.g. for dan-
gerous curves or steep gradients, provided
this information is stored in the map data.
In addition, you can define whether the
display of the sign is also to be accompa-
nied by a warning sound.
> Press the
Driver alerts button in the set-
tings menu.
The Driver alerts settings window ap-
pears.
The available signs are divided into 4 cate-
gories. The four categories can be enabled
or disabled individually.
The warning sound can be set individually
for each of the four categories by pressing
the symbol with the bell (
warning
sound switched on).
Note:
There is no standardised rule in Europe
on the use of this function (warning
about speed checks). Please check the le-
gal situation in the respective country.
In Germany, for example, it is an offence
to use this function while driving.