Becker TRAFFIC ASSIST PRO Z302 - Manual (Page 49)

49
NAVIGATION MODE >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
If your entry was not unique or the Traffic
Assist Pro was not able to uniquely assign
your entry, you will be shown appropriate
lists. You can then select the address you
want from these lists.
Depending on your entry, lists with town
names, lists with street names or com-
bined lists with town and street names can
be displayed.
The following example shows a list in
which a town can be selected.
Entries identified with the symbol
open up a further list when they are select-
ed. This can be necessary if, for example,
the same town name occurs a number of
times in the set country.
Once you have selected the town or street
you want in the lists, the menu for enter-
ing addresses is displayed after a short time
with your entry filled in.
You can then start route guidance, display
the route or store the address as described
on page 46.
Points of interest
Points of interest (POI) are included in
the map and can be displayed there.
Points of interest include airports and fer-
ry ports, restaurants, hotels, petrol sta-
tions, public buildings. You can use points
of interests as navigation destinations.
> Press
Enter destination in the fast ac-
cess menu.
> Press the Select Point of Interest but-
ton.
Note:
Voice entry can be restarted at any time
in the lists by pressing the
button.
Note:
You can only select points of interest in
the area in question if the GPS reception
is adequate for determining a position.
Otherwise, the last position stored will be
used.