Daktronics StatVision for Baseball - Manual (Page 9)

Installation 5
Section 2: Installation
2.1 Installation
StatVision can be installed on and operated from multiple computers.
1. Open an Internet browser.
2. Type
http://dakfiles.daktronics.com/downloads/Sports_Products/StatVision/ into
the address box.
3. Click on the “StatVision Install.exe” file.
4. Click Run. If a security warning pops up, click Run again.
5. Click Finish when done.
6. Repeat steps 1-5 on each computer that must have
StatVision installed. The “StatVision Install.exe” file may be
downloaded and saved to be transferred to other computers
without Internet access.
After installation, an icon should appear on the desktop
(Figure 2). Double-click this icon to open the program.
Alternately, go to Start > All Programs > Daktronics > StatVision.
Note: On Windows 7, it will be necessary to run the program as an administrator to
operate correctly. Right-click the StatVision icon and select Properties. Click on the
Compatibility tab, and ensure Run this program as an administrator is checked.
Be sure to also do this for DakStats, DSTI, and GameDay for best compatibility.
Figure 2: StatVision Icon