Mounting the intellinav system – Intellinav SE User Manual
Mounting the Intellinav System
Mounting on the Windshield
Clean the surface of the
windshield using rubbing
Press the suction cup
firmly against the
Rotate the lever to fix the suction cup in place.
NOTICE TO DRIVERS IN CALIFORNIA AND
MINNESOTA: State law prohibits drivers in California
(CVC 26708(a)) and Minnesota (169.71, Minnesota
Statutes 2006) from using suction mounts on their
windshields while operating motor vehicles
Mounting on the Dashboard
Remove the adhesive cover on the disc,
and stick the disc on the dashboard.
Press the suction cup firmly against the
Mounting the Cradle and GPS
1. Insert the GPS unit bottom in first, and then lock it
using the lever on the top.
Adjust the angles of the arms to achieve the best
Charging the Battery
Prior to first use, please use the AC adapter to fully
charge the unit for 4-6 hours, until battery LED turns
In the vehicle, you may plug in the car charger to
provide continuous power. On a full charge, the unit
can operate up to 5 hours.
To charge the battery, the Battery On/Off switch at
the bottom of the unit must in the On position.
To preserve battery power when the unit will not be
used for an extended period, set the Battery On/Off
switch to the Off position.